This switch is used within one of our high-end systems , that we manufacture and this was found to be an ideal replacement. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. On the passenger side of the K12, on the keyless entry ones, you can remove a keyhole cover to allow you to insert the key, for when the battery is flat. A new switch mounting plate was produced to fit in to the existing recess. If you can't get to the engine, you can't get a jump start, and you can't get the battery out to put it on charge.
Making AutoVillage your Number 1 online car portal for all Automotive Products and Services. Much to my relief it refused to let me. You still need a key to do it. However, it was slightly criticised for lack of head room and luggage space. So from now on, there is no need for you to go trawling from one car breaker yard to another, no need for you to visit scrapyard after scrap yard, looking for Door Lock Set And Key Parts, no need to spend hours searching online, trying to find a Used Door Lock Set And Key Car Part, New Nissan Micra Door Lock Set And Key Car Part or even Replacement Door Lock Set And Key Spares, anymore. This is the hardest part, the rest is very easy. Depending on these and other co.
Refitting is a simple case of doing the above in reverse order. Most variations from Nissan Micra were reputed for their reliability, excellent build quality, and user friendliness. It is difficult to do anything at all! Then maybe, just maybe, AutoVillage can help. Nissan should have Ewan on their consultancy team! Probably the plastic cam that presses the switch has finally worn too much. Here is my guide, with photos, on how to open your car door when the electronic locks don't work. The switch is beautifully made, and it's extremely satisfying to fit it and have the boot working properly and reliably again. I hope it's of help to someone! This problem has been getting worse to a point were the boot was practically unusable Being an electronics engineer, I felt it was my duty to sort this problem out, particularly after finding out the price Nissan where charging for a new switch and being of the same poor quality.
There are many hiding places. Lifting the cover from the back will pop out the two clips at the front. I'll send you an email with all the tracking information once it has been dispatched. Please call me if you want to see if it might be suitable. This part of the handle has a plastic cover and it will pop off if you know how to do it. The current K12 or the previous K11 model? What you may be able to do is close all doors and boot, lock it using the key fob.
To unlock the door without the key, move the inside lock knob to the unlock position 2. About 6 months after, she started experiencing the common fault of the boot not opening when the switch is pressed but worse still, the boot opening when the car was in motion. Wed 27 May 2009 12:43 Intelligent key for Nissan Micra - buzbee You have not provided enough information. Open the passenger door with a non-intelligent key, hide your intelligent key wrapped in foil and re-lock passenger door. Removing the above assembly is very easy. If fault message still exists, please check manual for corresponding solution.
I was told by Mechanic. Let AutoVillage do the work for you via our Professional Network of Car Spares and Car Door Lock Set And Key Part Suppliers, and get the Door Lock Set And Key Part or Door Lock Set And Key Spare you're looking delivered direct to you, in no time at all. Put the screwdriver in the slot underneath and gently but firmly pull the screwdriver outwards to prise the cover off; it is just clicked into place so get the angle and pressure right and the end section will pop off. Any idea when this feature was first fitted? I have learned the hard way that if you leave a Nissan Micra for a while without driving it, the battery can go completely dead. You need into the car to access the bonnet release lever, but without keys you can't get in. The key detection is very effective. Don't be too rough or you will break it as it is only plastic, but you will have to put some effort, in otherwise you won't budge it, especially if this is the first time you have removed it.
Through our network of Car Breakers, Car Dismantlers, otherwise known as Scrap Yards. On a K12 I chucked my coat in the boot with the keys in it! Nissan Micra The Nissan Micra, also known as the Nissan March in most of Latin America and most of Asia, is a supermini car from Japanese automaker Nissan, the original Micra chassis name K10 was introduced in October 1982 as a challenger to the Honda City, and Toyota Starlet. If no operation is performed within 5 seconds, the display will return to the previous display. He gives very clear instructions for removal and installation of the boot switch assembly - and it doesn't take long to do it. After that I wouldn't ride inthat car unless at least one window was down! It has a heater in the element. When you close the boot, it cannot be open from the outside. This solution may also be suitable for boot switches on other vehicles.
Once the panel is removed, you'll see two nuts holding the above assembly in place see second image above. Search and Find Nissan Micra Door Lock Set And Key Spares and Replacement Parts - The Easy Route Looking to find and buy Nissan Micra Door Lock Set And Key Parts, Car Nissan Micra Door Lock Set And Key Spares, Replacement Door Lock Set And Key Parts? Nissan made a hidden keyhole so you can get into your car when the battery is dead and the locking system doesn't work. This video was made after this happened to me and I couldn't find the simple solution I did find dozens of similar options - but not this one. This isn't usually a big problem, except for the fact that the electronic locking system won't work either so you can't get into the car to open the engine. There is also a manual override button, I guess intended for allowing the shift to neutral for towing etc even when the car is switched off. Bend down and look up, underneath this part of the handle you will see a small slot about 1cm across - it's just the right size and shape to put a screwdriver head into.
When activated, the hazard indicator will flash twice. This video shows you how to use the emergency manual key option. . Use a socket head spanner to remove the two nuts. Be gentle when doing this to ensure you don't snap any of the lugs.
Not sure what to do without keys. Nissan Micra Boot Switch Failure - Solution! Mon 6 Sep 2004 17:18 override option for the Intelligent key? I fixed this by moving the shift out of Park, and carefully bending the microswitch lever up towards the cam. The automatic unlock function can be deactivated or activated. This I was told by Nissan Mech. Avoid eye exposure to direct or scattered radiation. The battery is undoubtedly flat but I would have thought it would have opened manually with the passenger side door lock? Is it possible to gain access through the rear tail gate lock? I went with him to look and ask about it for him.